You'll need to load the bridge on an intermediate computer, not the duo. For
example, on my setup I put the bridge on the LC 475. It connects the duo to
the other machine transparently. You'll need to make sure the Appletalk on
the intermediate computer is set to Ethernet.
Scott Holder
----- Original Message -----
From: "Kris Feldmann" <[EMAIL PROTECTED]>
To: "Duo/2400 List" <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 8:40 PM
Subject: [Duo2400] Re: ethernet for duo 2300?
> The LocalTalk Bridge control panel won't load on the Duo. It
> complains that the printer port is in use. It doesn't seem
> to understand the Duo's shared Modem/Printer port.
>
>
> Kris Feldmann
>
> Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
> > Date: Fri, 13 Jul 2001 20:16:27 -0400
> > From: "Scott Holder" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]> (Duo/2400 List)
> > Subject: [Duo2400] Re: ethernet for duo 2300?
> >
> > Cool, I'd be interested in hearing the results. You'll probably need to
set
> > both the duo and the bridge to use Appletalk/MacIP in TCP IP. You'll
> > probably also want to give the bridge, the Duo, and whatever machine
you're
> > connecting to IPs in the same range (10.0.0.1, 10.0.0.2, etc), and
you'll
> > need a proxy on the main machine. On the duo, you'll probably want to
set
> > the router address to the bridge, and the bridge set the router address
to
> > whatever the main machine's IP is.
> >
> > This is all theory, I haven't tried it and it's as likely to not work as
> > work :) My curiosity is getting the better of me again....
> >
> > Scott Holder
> > ----- Original Message -----
> > From: "Kris Feldmann" <[EMAIL PROTECTED]>
> > To: "Duo/2400 List" <[EMAIL PROTECTED]>
> > Sent: Friday, July 13, 2001 8:08 PM
> > Subject: [Duo2400] Re: ethernet for duo 2300?
> >
> >
> > > I downloaded the bridge... I'll try it and see if I can use TCP/IP
> > > stuff over the bridge.
> > >
> > >
> > > Kris Feldmann
> > >
> > > Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
> > > > Date: Fri, 13 Jul 2001 19:58:21 -0400
> > > > From: "Scott Holder" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]> (Duo/2400 List)
> > > > Subject: [Duo2400] Re: ethernet for duo 2300?
> > > >
> > > > Do what exactly? :)
> > > >
> > > > I just took my LC III (later upgraded to an LC475), added a cheap LC
PDS
> > > > Ethernet card, and then installed the Localtalk bridge available for
> > free
> > > > from Apple on it. From there, I plugged the Ethernet into my PC or
> > PowerMac,
> > > > and then hooked my duo up to it through the LC's printer port. Then,
I
> > could
> > > > share files between the PowerMac or PC transparently. I had some
limited
> > > > success with internet stuff, but haven't gone too far with it. I
don't
> > see
> > > > why it shouldn't work if the TCP/IP on the LC is set to
Appletalk/MacIP.
> > > > I'll have to try it when I get home tonight :)
> > > >
> > > > Hope this is at all useful :)
> > > > Scott Holder
> > >
>
>
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
>
> To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
> To switch to the DIGEST mode, E-mail to
<[EMAIL PROTECTED]>
> Need help from a real person? Try.
<[EMAIL PROTECTED]>
>
> ----------
> Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
> MPC-100 | <http://www.drbott.com/prod/mpc100.html>
>
> NineWire | If they are cool enough to host this list...
> Digital Solutions | ...you should check them out! http://www.NineWire.com/
>
> Midwest Mac Parts ][ <http://www.midwestmac.com>
> After-market parts for Macs. ][ 888-356-1104 ][
>
> MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
> Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
