Hi all! Is it possible some how to configure what pin(s) are activated in the paralellport connector when changing band? If it could be (like in Ham Radio Delux ) I would not need a banddecoder to select antenna. Then I could just let each pin drive a optocoupler controlling a coax relay.
/Anders From [EMAIL PROTECTED] Mon Sep 5 04:35:54 2005 From: [EMAIL PROTECTED] (ON4AOI) Date: Mon Sep 5 04:41:56 2005 Subject: [Dx4win] Can I configure the banddecoder output? In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hi Anders, No you can't change the pin out on the LPTport Available is a BCD code output 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Janis SM4RNA Sent: Monday, September 05, 2005 9:34 AM To: [email protected] Subject: [Dx4win] Can I configure the banddecoder output? Hi all! Is it possible some how to configure what pin(s) are activated in the paralellport connector when changing band? If it could be (like in Ham Radio Delux ) I would not need a banddecoder to select antenna. Then I could just let each pin drive a optocoupler controlling a coax relay. /Anders _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
