Very neat - unfortunately, some parallel ports these days only run 3.3 volts, but it would be worth checking.
73, Pete N4ZR At 07:32 AM 9/7/2005, Teemu, SM0WKA wrote: >You can also build that same circuit by yourself for maybe $4 on simple Vero >board. K6XX has made one for FT1000MP band-data but it is exactly the same >voltages coming out from the Parallel port of the computer. >http://www.k6xx.com/radio/mpbandbx.html > >Happy soldering > >73 de >Teemu SM0WKA - SM0W > >> -----Ursprungligt meddelande----- >> Fr?n: [EMAIL PROTECTED] [mailto:dx4win- >> [EMAIL PROTECTED] F?r Anders Janis SM4RNA >> Skickat: den 7 september 2005 08:43 >> Till: [email protected] >> ?mne: Re: [Dx4win] Can I configure the banddecoder output? >> >> Thanks. Looks great. $20 for international shippong maks it close to $40. >> Maybe I can find someone else here that wants one and split the shipping. >> >> An advantage to be able to set freq ranges and output pins freely in >> DX4Win is that some non HAM freqs can be sent to a broadband dipole or >> what ever. >> >> /Anders >> >> >> >> >> ----- Original Message ----- >> From: "Pete Smith" <[EMAIL PROTECTED]> >> To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>; <[email protected]> >> Sent: Monday, September 05, 2005 12:21 PM >> Subject: Re: [Dx4win] Can I configure the banddecoder output? >> >> >> > W9XT makes a very inexpensive band decoder board that provides 10 >> outputs. It is less than US$20 plus shipping. I am using two of them in >> a dual band decoder built in an old printer switch cabinet. >> > >> > 73, Pete N4ZR >> > >> > At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote: >> > >Hi Guy! >> > > >> > >Thanks for quick awnser. >> > > >> > >I guess it could be easy to implement, but then you would get in a >> conflict of intrests. Hi hi! >> > > >> > >/Anders >> > > >> > >----- Original Message ----- >> > >From: "ON4AOI" <[EMAIL PROTECTED]> >> > >To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> >> > >Cc: <[email protected]> >> > >Sent: Monday, September 05, 2005 10:35 AM >> > >Subject: RE: [Dx4win] Can I configure the banddecoder output? >> > > >> > > >> > >> Hi Anders, >> > >> >> > >> No you can't change the pin out on the LPTport >> > >> Available is a BCD code output >> > >> >> > >> 73 Guy ON4AOI >> > >> >> > >> BAND DECODER and related stuff at >> > >> >> > >> http://www.on4aoi.be/banddecoder.htm >> > >> >> > >> DX4WIN soft and related stuff at >> > >> >> > >> http://www.on4aoi.be/dx4win.htm >> > >> >> > >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at >> > >> >> > >> http://www.on4aoi.be/keyer.htm >> > >> >> > >> ARSWIN link and related stuff at >> > >> >> > >> http://www.on4aoi.be/web7.htm >> > >> >> > >> DXTELNET soft and related stuff at >> > >> >> > >> http://www.on4aoi.be/dxt.htm >> > >> >> > >> >> > >> -----Original Message----- >> > >> From: [EMAIL PROTECTED] [mailto:dx4win- >> [EMAIL PROTECTED] >> > >> On Behalf Of Anders Janis SM4RNA >> > >> Sent: Monday, September 05, 2005 9:34 AM >> > >> To: [email protected] >> > >> Subject: [Dx4win] Can I configure the banddecoder output? >> > >> >> > >> Hi all! >> > >> >> > >> Is it possible some how to configure what pin(s) are activated in the >> > >> paralellport connector when changing band? If it could be (like in >> Ham Radio >> > >> Delux ) I would not need a banddecoder to select antenna. Then I >> could just >> > >> let each pin drive a optocoupler controlling a coax relay. >> > >> >> > >> /Anders >> > >> _______________________________________________ >> > >> Dx4win mailing list >> > >> [email protected] >> > >> http://mailman.qth.net/mailman/listinfo/dx4win >> > >> >> > >> >> > >> >> > >> >> > >_______________________________________________ >> > >Dx4win mailing list >> > >[email protected] >> > >http://mailman.qth.net/mailman/listinfo/dx4win >> > >> _______________________________________________ >> Dx4win mailing list >> [email protected] >> http://mailman.qth.net/mailman/listinfo/dx4win > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win
