Wow, that sounds high! That is a generic shipping cost, covering all of the things he sells, including some much larger items. My band decoders arrived in flat envelopes weighing only a few ounces. If you correspond by e-mail with Gary I bet he will reduce that figure.
73, Pete N4ZR At 02:43 AM 9/7/2005, Anders Janis SM4RNA wrote: >Thanks. Looks great. $20 for international shippong maks it close to $40. >Maybe I can find someone else here that wants one and split the shipping. > >An advantage to be able to set freq ranges and output pins freely in DX4Win is >that some non HAM freqs can be sent to a broadband dipole or what ever. > >/Anders > > > > >----- Original Message ----- >From: "Pete Smith" <[EMAIL PROTECTED]> >To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>; <[email protected]> >Sent: Monday, September 05, 2005 12:21 PM >Subject: Re: [Dx4win] Can I configure the banddecoder output? > > >> W9XT makes a very inexpensive band decoder board that provides 10 outputs. >> It is less than US$20 plus shipping. I am using two of them in a dual band >> decoder built in an old printer switch cabinet. >> >> 73, Pete N4ZR >> >> At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote: >> >Hi Guy! >> > >> >Thanks for quick awnser. >> > >> >I guess it could be easy to implement, but then you would get in a conflict >> >of intrests. Hi hi! >> > >> >/Anders >> > >> >----- Original Message ----- >> >From: "ON4AOI" <[EMAIL PROTECTED]> >> >To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> >> >Cc: <[email protected]> >> >Sent: Monday, September 05, 2005 10:35 AM >> >Subject: RE: [Dx4win] Can I configure the banddecoder output? >> > >> > >> >> Hi Anders, >> >> >> >> No you can't change the pin out on the LPTport >> >> Available is a BCD code output >> >> >> >> 73 Guy ON4AOI >> >> >> >> BAND DECODER and related stuff at >> >> >> >> http://www.on4aoi.be/banddecoder.htm >> >> >> >> DX4WIN soft and related stuff at >> >> >> >> http://www.on4aoi.be/dx4win.htm >> >> >> >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at >> >> >> >> http://www.on4aoi.be/keyer.htm >> >> >> >> ARSWIN link and related stuff at >> >> >> >> http://www.on4aoi.be/web7.htm >> >> >> >> DXTELNET soft and related stuff at >> >> >> >> http://www.on4aoi.be/dxt.htm >> >> >> >> >> >> -----Original Message----- >> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> >> On Behalf Of Anders Janis SM4RNA >> >> Sent: Monday, September 05, 2005 9:34 AM >> >> To: [email protected] >> >> Subject: [Dx4win] Can I configure the banddecoder output? >> >> >> >> Hi all! >> >> >> >> Is it possible some how to configure what pin(s) are activated in the >> >> paralellport connector when changing band? If it could be (like in Ham >> >> Radio >> >> Delux ) I would not need a banddecoder to select antenna. Then I could >> >> just >> >> let each pin drive a optocoupler controlling a coax relay. >> >> >> >> /Anders >> >> _______________________________________________ >> >> Dx4win mailing list >> >> [email protected] >> >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> >> >> >> >> >> >> >_______________________________________________ >> >Dx4win mailing list >> >[email protected] >> >http://mailman.qth.net/mailman/listinfo/dx4win >> >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win
