Hi Guy! Thanks for quick awnser.
I guess it could be easy to implement, but then you would get in a conflict of intrests. Hi hi! /Anders ----- Original Message ----- From: "ON4AOI" <[EMAIL PROTECTED]> To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Monday, September 05, 2005 10:35 AM Subject: RE: [Dx4win] Can I configure the banddecoder output? > Hi Anders, > > No you can't change the pin out on the LPTport > Available is a BCD code output > > 73 Guy ON4AOI > > BAND DECODER and related stuff at > > http://www.on4aoi.be/banddecoder.htm > > DX4WIN soft and related stuff at > > http://www.on4aoi.be/dx4win.htm > > DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at > > http://www.on4aoi.be/keyer.htm > > ARSWIN link and related stuff at > > http://www.on4aoi.be/web7.htm > > DXTELNET soft and related stuff at > > http://www.on4aoi.be/dxt.htm > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Anders Janis SM4RNA > Sent: Monday, September 05, 2005 9:34 AM > To: [email protected] > Subject: [Dx4win] Can I configure the banddecoder output? > > Hi all! > > Is it possible some how to configure what pin(s) are activated in the > paralellport connector when changing band? If it could be (like in Ham Radio > Delux ) I would not need a banddecoder to select antenna. Then I could just > let each pin drive a optocoupler controlling a coax relay. > > /Anders > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > > > From [EMAIL PROTECTED] Mon Sep 5 06:21:46 2005 From: [EMAIL PROTECTED] (Pete Smith) Date: Mon Sep 5 06:28:31 2005 Subject: [Dx4win] Can I configure the banddecoder output? In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> W9XT makes a very inexpensive band decoder board that provides 10 outputs. It is less than US$20 plus shipping. I am using two of them in a dual band decoder built in an old printer switch cabinet. 73, Pete N4ZR At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote: >Hi Guy! > >Thanks for quick awnser. > >I guess it could be easy to implement, but then you would get in a conflict of >intrests. Hi hi! > >/Anders > >----- Original Message ----- >From: "ON4AOI" <[EMAIL PROTECTED]> >To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> >Cc: <[email protected]> >Sent: Monday, September 05, 2005 10:35 AM >Subject: RE: [Dx4win] Can I configure the banddecoder output? > > >> Hi Anders, >> >> No you can't change the pin out on the LPTport >> Available is a BCD code output >> >> 73 Guy ON4AOI >> >> BAND DECODER and related stuff at >> >> http://www.on4aoi.be/banddecoder.htm >> >> DX4WIN soft and related stuff at >> >> http://www.on4aoi.be/dx4win.htm >> >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at >> >> http://www.on4aoi.be/keyer.htm >> >> ARSWIN link and related stuff at >> >> http://www.on4aoi.be/web7.htm >> >> DXTELNET soft and related stuff at >> >> http://www.on4aoi.be/dxt.htm >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> On Behalf Of Anders Janis SM4RNA >> Sent: Monday, September 05, 2005 9:34 AM >> To: [email protected] >> Subject: [Dx4win] Can I configure the banddecoder output? >> >> Hi all! >> >> Is it possible some how to configure what pin(s) are activated in the >> paralellport connector when changing band? If it could be (like in Ham Radio >> Delux ) I would not need a banddecoder to select antenna. Then I could just >> let each pin drive a optocoupler controlling a coax relay. >> >> /Anders >> _______________________________________________ >> Dx4win mailing list >> [email protected] >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> >> >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win
