Thanks. Looks great. $20 for international shippong maks it close to $40. Maybe I can find someone else here that wants one and split the shipping.
An advantage to be able to set freq ranges and output pins freely in DX4Win is that some non HAM freqs can be sent to a broadband dipole or what ever. /Anders ----- Original Message ----- From: "Pete Smith" <[EMAIL PROTECTED]> To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>; <[email protected]> Sent: Monday, September 05, 2005 12:21 PM Subject: Re: [Dx4win] Can I configure the banddecoder output? > W9XT makes a very inexpensive band decoder board that provides 10 outputs. > It is less than US$20 plus shipping. I am using two of them in a dual band > decoder built in an old printer switch cabinet. > > 73, Pete N4ZR > > At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote: > >Hi Guy! > > > >Thanks for quick awnser. > > > >I guess it could be easy to implement, but then you would get in a conflict > >of intrests. Hi hi! > > > >/Anders > > > >----- Original Message ----- > >From: "ON4AOI" <[EMAIL PROTECTED]> > >To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> > >Cc: <[email protected]> > >Sent: Monday, September 05, 2005 10:35 AM > >Subject: RE: [Dx4win] Can I configure the banddecoder output? > > > > > >> Hi Anders, > >> > >> No you can't change the pin out on the LPTport > >> Available is a BCD code output > >> > >> 73 Guy ON4AOI > >> > >> BAND DECODER and related stuff at > >> > >> http://www.on4aoi.be/banddecoder.htm > >> > >> DX4WIN soft and related stuff at > >> > >> http://www.on4aoi.be/dx4win.htm > >> > >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at > >> > >> http://www.on4aoi.be/keyer.htm > >> > >> ARSWIN link and related stuff at > >> > >> http://www.on4aoi.be/web7.htm > >> > >> DXTELNET soft and related stuff at > >> > >> http://www.on4aoi.be/dxt.htm > >> > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >> On Behalf Of Anders Janis SM4RNA > >> Sent: Monday, September 05, 2005 9:34 AM > >> To: [email protected] > >> Subject: [Dx4win] Can I configure the banddecoder output? > >> > >> Hi all! > >> > >> Is it possible some how to configure what pin(s) are activated in the > >> paralellport connector when changing band? If it could be (like in Ham > >> Radio > >> Delux ) I would not need a banddecoder to select antenna. Then I could just > >> let each pin drive a optocoupler controlling a coax relay. > >> > >> /Anders > >> _______________________________________________ > >> Dx4win mailing list > >> [email protected] > >> http://mailman.qth.net/mailman/listinfo/dx4win > >> > >> > >> > >> > >_______________________________________________ > >Dx4win mailing list > >[email protected] > >http://mailman.qth.net/mailman/listinfo/dx4win > From [EMAIL PROTECTED] Wed Sep 7 07:32:32 2005 From: [EMAIL PROTECTED] (Teemu, SM0WKA) Date: Wed Sep 7 07:38:18 2005 Subject: SV: [Dx4win] Can I configure the banddecoder output? In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> You can also build that same circuit by yourself for maybe $4 on simple Vero board. K6XX has made one for FT1000MP band-data but it is exactly the same voltages coming out from the Parallel port of the computer. http://www.k6xx.com/radio/mpbandbx.html Happy soldering 73 de Teemu SM0WKA - SM0W > -----Ursprungligt meddelande----- > Fr?n: [EMAIL PROTECTED] [mailto:dx4win- > [EMAIL PROTECTED] F?r Anders Janis SM4RNA > Skickat: den 7 september 2005 08:43 > Till: [email protected] > ?mne: Re: [Dx4win] Can I configure the banddecoder output? > > Thanks. Looks great. $20 for international shippong maks it close to $40. > Maybe I can find someone else here that wants one and split the shipping. > > An advantage to be able to set freq ranges and output pins freely in > DX4Win is that some non HAM freqs can be sent to a broadband dipole or > what ever. > > /Anders > > > > > ----- Original Message ----- > From: "Pete Smith" <[EMAIL PROTECTED]> > To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>; <[email protected]> > Sent: Monday, September 05, 2005 12:21 PM > Subject: Re: [Dx4win] Can I configure the banddecoder output? > > > > W9XT makes a very inexpensive band decoder board that provides 10 > outputs. It is less than US$20 plus shipping. I am using two of them in > a dual band decoder built in an old printer switch cabinet. > > > > 73, Pete N4ZR > > > > At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote: > > >Hi Guy! > > > > > >Thanks for quick awnser. > > > > > >I guess it could be easy to implement, but then you would get in a > conflict of intrests. Hi hi! > > > > > >/Anders > > > > > >----- Original Message ----- > > >From: "ON4AOI" <[EMAIL PROTECTED]> > > >To: "'Anders Janis SM4RNA'" <[EMAIL PROTECTED]> > > >Cc: <[email protected]> > > >Sent: Monday, September 05, 2005 10:35 AM > > >Subject: RE: [Dx4win] Can I configure the banddecoder output? > > > > > > > > >> Hi Anders, > > >> > > >> No you can't change the pin out on the LPTport > > >> Available is a BCD code output > > >> > > >> 73 Guy ON4AOI > > >> > > >> BAND DECODER and related stuff at > > >> > > >> http://www.on4aoi.be/banddecoder.htm > > >> > > >> DX4WIN soft and related stuff at > > >> > > >> http://www.on4aoi.be/dx4win.htm > > >> > > >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at > > >> > > >> http://www.on4aoi.be/keyer.htm > > >> > > >> ARSWIN link and related stuff at > > >> > > >> http://www.on4aoi.be/web7.htm > > >> > > >> DXTELNET soft and related stuff at > > >> > > >> http://www.on4aoi.be/dxt.htm > > >> > > >> > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] [mailto:dx4win- > [EMAIL PROTECTED] > > >> On Behalf Of Anders Janis SM4RNA > > >> Sent: Monday, September 05, 2005 9:34 AM > > >> To: [email protected] > > >> Subject: [Dx4win] Can I configure the banddecoder output? > > >> > > >> Hi all! > > >> > > >> Is it possible some how to configure what pin(s) are activated in the > > >> paralellport connector when changing band? If it could be (like in > Ham Radio > > >> Delux ) I would not need a banddecoder to select antenna. Then I > could just > > >> let each pin drive a optocoupler controlling a coax relay. > > >> > > >> /Anders > > >> _______________________________________________ > > >> Dx4win mailing list > > >> [email protected] > > >> http://mailman.qth.net/mailman/listinfo/dx4win > > >> > > >> > > >> > > >> > > >_______________________________________________ > > >Dx4win mailing list > > >[email protected] > > >http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win
