Dear Friends:
Will appreciate your assistance to solve the following:
I am using the MMTTY interfaced with DX4WIN, Ver 7.01 software and the
interface between my Mark V and the PC is the Nomic Rig Blaster.
Whenever I grab a cluster spot both the green LSB and the red RTTY leds light
but I am unable to transmit, since the PTT is not activated. However, if I
turn off the red RTTY led and only leave the LSB led on I am able to transmit.
Obviously, this causes a shift on the frequency and I am obliged to retune.
That process is time consuming and inefficient. So will appreciate comments on
the proper way to configure the system so that I can transmit as soon as I grab
the spots.
Appreciate very much comments on the above situation.
73 de Luis, KP4ED
From [EMAIL PROTECTED] Tue Feb 14 10:28:46 2006
From: [EMAIL PROTECTED] (Rick Craig)
Date: Tue Feb 14 10:30:40 2006
Subject: [Dx4win] {Spam?} re: MMTTY
Message-ID: <[EMAIL PROTECTED]>
I'm also having problems getting MMTTY to work with DX4Win. According to the
help file, hitting F1 through F8 should key the transmitter and send the
message.
When I try it, it doesn't key the transmitter but does que the message so
when I
hit F11, the transmitter keys and the message goes out. Am I missing a special
character at the front of the message that will key the transmitter? I
couldn't find
anything in the help file that would give me a clue.
Thanks, Rick, N6ND
n6nd at arrl dot net
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
