Hello, Same thing with FT-1000D here. I have CW display offset set to 400 Hz, i.e. when I listen to a CW signal with 400 Hz pitch, the display shows his true frequency. But now DX4WIN sends me 400 Hz HIGHER than that the first time I click.
with a second click I arrive at the correct frequency for the spotted station. But if I next click once on an SSB spot, the radio is sent to a frequency which is 400 Hz LOWER than the spotted frequency. Again, a second click sets the radio to the actual spot frequency. 73 de Kjell, PB3SM - SM6CPI > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Louis Dietrich > Sent: 11 December 2008 19:51 > To: 'Jim Reisert AD1C'; [email protected] > Cc: [email protected] > Subject: RE: [Dx4win] Freq doesn't change properly when > clicking a spot. > > Jim, > > I posted this a few days ago....It was in regard to my FT2000 > and FT 9000... > > "DX4Winers, > and Paul > > I am experiencing some problems with the latest version... > > Using identical rig files, as we used in 7.05.03 , here's > what is happening in 7.06.02. > > 1. If the rig is on SSB and I click on a CW spot, say > 7044, the rig goes > to 7044.7. If I click on the same spot again, the rig shows 7044... > 2. If I then click on another CW spot, the rig goes to the correct > frequency. > 3. If I then click on a SSB spot 14185 (Rig still on CW), > the rig goes > to 14184.3. If I click on the same spot, the frequency read 14185... > > Something has changed in the latest version of DX4WIN.... > > I have switched back and forth between the versions...and > have the same rig files in both.... > > Can anyone else verify the above?".... > > Sounds like a similar problem....there is definitely > something different in the latest version....I cleared my > problem by changing the offset frequency in both rigs, which > is the first time I ever had to do that... > > 73 > > Lou N2TU > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] > On Behalf Of Jim Reisert AD1C > Sent: Thursday, December 11, 2008 1:01 PM > To: [email protected] > Cc: [email protected] > Subject: Re: [Dx4win] Freq doesn't change properly when > clicking a spot. > > Hi Walt, > > I don't understand this part: > > > If I am on CW and I grab an SSB spot, the frequency I'm taken to is > > offset (low) from the actual frequency by the amount of the offset > > Amount of "what" offset? > > There are two Pro III .RIG files, try both and see if the > problem changes/goes away. The "B" flavor doesn't work with my rig. > > I have a Pro III at home, I can try this tonight. > > 73 - Jim AD1C > > 2008/12/11 <[email protected]>: > > > Hey all, > > > > Version: DX4Win 7.06.02 > > Rig: IC756 Pro III > > > > If I am on CW and I grab an SSB spot, the frequency I'm > taken too is > > offset (low) from the actual frequency by the amount of the > offset I > > use on CW. A second double click on the spot corrects this anomaly. > > > > Any ideas as to what is causing this problem? Previous > versions, i.e. > > dx4win7.05 didn't exhibit this behavior. > > > -- > Jim Reisert AD1C/Ø, <[email protected]>, > http://www.ad1c.us "Let Not Mankind Bogart Love" - Willie > Nelson _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
