Guy, As far as I can see, the rig files are identical to previous versions. In FT-1000 the offset is added internally direct to the display. It looks like v.7.06 now is adding an offset to the actual frequency before it is sent to the radio every time when a change of mode command is sent. This may be right for the two rigs you had problems with, but not for the 98 percent which worked OK before. You must step backwards to the point where the "fix" was applied and make sure that it is limited to the few problem radios. Maybe Paul can get away by adding an IF...ELSE statement... 73, Kjell, PB3SM - SM6CPI
_____ From: [email protected] [mailto:[email protected]] On Behalf Of ON4AOI Sent: 11 December 2008 20:33 To: [email protected] Cc: [email protected] Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: [email protected] [mailto:[email protected]] Namens [email protected] Verzonden: donderdag 11 december 2008 18:21 Aan: [email protected] Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 [email protected] [email protected]
_______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
