I tried changing the freq resolution to 1Hz on PRO III. Sometimes it's ok, mostly the CW offset pitch is there until a second double click.
73 Erkki OH2BF -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Louis Dietrich Sent: Thursday, December 11, 2008 9:48 PM To: 'ON4AOI'; [email protected] Cc: [email protected] Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Guy and Walt, The problem does not appear to be in the rig files....and slowing the command processing doesnt appear to be the cure. I have tried to use delays in the file for the Yaesu FT9000/ 2000 ....and everything works in 7.05. In the Yaesu series of radios, there is a menu FRQDISP...by changing it to DIR, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar Menu item in ICOM...at least, you can fix the problem as Paul figures out what happened in 7.06. By fixing the Omni VII and K3, we seem to have broken the other rigs CAT. The FT2000 and 9000 have very quick processors and can handle the commands...so the problem is probably elsewhere. BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP rigs...if you need it, please contact me off the reflector... 73, Lou N2TU From: [email protected] [mailto:[email protected]] On Behalf Of ON4AOI Sent: Thursday, December 11, 2008 2:33 PM To: [email protected] Cc: [email protected] Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: [email protected] [mailto:[email protected]] Namens [email protected] Verzonden: donderdag 11 december 2008 18:21 Aan: [email protected] Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 [email protected] [email protected] _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
