Hi Wes, Here in TX DATA mode DATA A I have full range of Shift: FC 400-2600Hz Width: 50-4000Hz
The LO and HI limits vary with BW but basically as much as you want. I regularly set the BW to 150Hz and SHIFT slowly up the band working stations as they appear on the waterfall. Regards, Mike VP8NO ----- Original Message ----- From: "Wes Stewart" <[email protected]> To: "Elecraft Reflector" <[email protected]> Sent: Thursday, December 16, 2010 3:01 PM Subject: [Elecraft] Data A filter questions I don't do much PSK operation but I was just fiddling with it and noted something puzzling (to me anyway). Data mode A, although basically a USB mode, defaults to CW-like filtering. The "NORM" setting is 400 Hz (my CW filter width, I guess), "Shift" is 1.5 KHz (and very limited) and "LO" and "HI" are locked out. Considering how much PSK operation is done, this is quite limiting. Is there some compelling reason that I'm overlooking why the default for this mode shouldn't be the same as SSB, with the options to have both SHIFT/WIDTH and HI and LO CUT? Wes N7WS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.872 / Virus Database: 271.1.1/3319 - Release Date: 12/16/10 04:34:00 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
