Jamie,
Did the antenna selection on the K3 get toggled to ANT 1 for
six meters? Remember the ATN1/ANT2 is stored on a per band
basis. If the rig was used in 6 with ANT 1 at field day, it's
likely that ANT 1 is still selected!
73,
... Joe, W4TV
On 7/1/2011 12:06 PM, James C. Hall, MD wrote:
> Hello:
>
>
>
> After returning my K3 back to the shack after Field Day, I have discovered
> that 6M no longer transmits with low SWR. I checked all the rear panel
> connections as it is interfaced through a microham MK2R+ and Stationmaster
> band decoder. However, I have the 6M antenna coax directly going to Antenna
> 2 on the radio. Using an antenna analyzer, the antenna shows excellent SWR.
> Using a dummy load to each antenna port, all bands shows good SWR except 6M.
> I updated the firmware and cycled the power but I still have the HI SWR
> showing with 6M.
>
>
>
> I do have the PR6 pre-amp in line, but the problem is not receive.
>
>
>
> I'm stumped. Any help appreciated.
>
>
>
> 73, Jamie
>
> WB4YDL
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
