Gene, You may have discovered the "key" - I suspect you have CONFIG: VFO OFS set to "Yes" - that allows the RIT/XIT knob to tune in coarse increments when RIT and XIT are off.
It has nothing to do with ghosts and goblins, just your menu settings. 73, Don W3FPR On 10/31/2011 6:52 PM, Gene Langendorff wrote: > I have just discovered something else. With RIT/XIT turned off, turning the > RIT/XIT knob changes the frequency of the K3 and the displays on both K3 and > P3. The rate is 0.1 kHz as if in "COARSE" tuning mode. I see no mention of > this "feature" in the K3 manual. > > I thought having the P3 connected to the K3 might cause some interaction so > disconnected it -- same behavior on the K3. > > Maybe it has something to do with the date today. The goblins are doing it > to us. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
