Hello,
the TX isn't blinking. Have done further test and recognized, that if I chooes
the FM-Mode - the Power Output was ok. Seems be the K3 does not work in CW and
SSB so far.
As well the TUNE-button is working as well.
Karl
=============================
am Mittwoch, 11. April 2012 um 19:58 schrieben Sie:
Lieber Karl-Heinz,
First thing to check: Make sure "TX" on right side of display isn't blinking.
If it is, press and hold TEST.
73,
Hank, W6SX
On Wed, Apr 11, 2012 at 10:53 AM, Karl-Heinz - DL2FAG <[email protected]> wrote:
Hello,
I am running into some trouble with the K3 after playing around
with the unit (macro, settigs etc.)
After a while I recognized, that the K3 does not transmit - no output in CW nor
in SSB - even PTT does work.
Tuning with the "TUNE-Button" works and give the adjusted output
power.
Seems that maybe I have misconfigured a parameter - but doesn't find
it.
Any idea from the readers of the refelctors - where I have to look
for?
Thanks
--
73 de
Karl-Heinz - DL2FAG
mailto:[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mit freundlichen Grüßen
Karl-Heinz - DL2FAG
mailto:[email protected]
===8<============== Ende des Original Nachrichtentextes =============
--
Mit freundlichen Grüßen
Karl-Heinz mailto:[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
