Hi Elliott Even with VOX or PTT the same result - no power output in SSB and CW. In Data Mode - if I push the microphone PTT - a diddle is produced and I have a power output.
Karl am Mittwoch, 11. April 2012 um 21:17 schrieben Sie: > Did you turn on the VOX?? > ----- Original Message ----- > From: "Karl-Heinz - DL2FAG" <[email protected]> > To: <[email protected]> > Sent: Wednesday, April 11, 2012 11:51 AM > Subject: Re: [Elecraft] Troubel TX on K3 > Hello, > the TX isn't blinking. Have done further test and recognized, that if I > chooes the FM-Mode - the Power Output was ok. Seems be the K3 does not work > in CW and SSB so far. > As well the TUNE-button is working as well. > Karl > ============================= > am Mittwoch, 11. April 2012 um 19:58 schrieben Sie: > Lieber Karl-Heinz, > First thing to check: Make sure "TX" on right side of display isn't > blinking. If it is, press and hold TEST. > 73, > Hank, W6SX > On Wed, Apr 11, 2012 at 10:53 AM, Karl-Heinz - DL2FAG <[email protected]> > wrote: > Hello, > I am running into some trouble with the K3 after playing around > with the unit (macro, settigs etc.) > After a while I recognized, that the K3 does not transmit - no output in CW > nor > in SSB - even PTT does work. > Tuning with the "TUNE-Button" works and give the adjusted output > power. > Seems that maybe I have misconfigured a parameter - but doesn't find > it. > Any idea from the readers of the refelctors - where I have to look > for? > Thanks > -- > 73 de > Karl-Heinz - DL2FAG > mailto:[email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- > Mit freundlichen Grüßen > Karl-Heinz - DL2FAG > mailto:[email protected] > ===8<============== Ende des Original Nachrichtentextes ============= -- Mit freundlichen Grüßen Karl-Heinz - DL2FAG mailto:[email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
