Phil,
Exceeding the specifications with any equipment is "at your own peril"
with any equipment.
Although I doubt that 15 volts will cause a problem with the KX1, the
regulators will generate more heat than the design point predicts - and
there may be other consequences.
A few diodes in the power cable for that power source will drop the
voltage down, or choose another supply. Some power supplies can be
adjusted for output voltage, but I suspect you have a sealed power
supply that was intended for a computer, so do what you have to to
remain is spec.
73,
Don W3FPR
On 5/12/2013 7:24 PM, Philip Townsend Lontz wrote:
The user book says 14vdc... I have a reg. power supply that does,15.000 vdc. Is
that going to be a problem?
Phil
Non judgement day is near
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
