The PS in question is a regulated ps from an AOR 7030 receiver. It's got a bit of ripple as well. Non adjustable but I may Change that. I don't want to stress the regulators in the KX1... So maybe another supply is in order... Might be easier.
Non judgement day is near On May 12, 2013, at 5:44 PM, Philip Townsend Lontz <[email protected]> wrote: > Thank you Don... > > Non judgement day is near > > > > > On May 12, 2013, at 5:41 PM, Don Wilhelm <[email protected]> wrote: > >> Phil, >> >> Exceeding the specifications with any equipment is "at your own peril" with >> any equipment. >> Although I doubt that 15 volts will cause a problem with the KX1, the >> regulators will generate more heat than the design point predicts - and >> there may be other consequences. >> >> A few diodes in the power cable for that power source will drop the voltage >> down, or choose another supply. Some power supplies can be adjusted for >> output voltage, but I suspect you have a sealed power supply that was >> intended for a computer, so do what you have to to remain is spec. >> >> 73, >> Don W3FPR >> >> On 5/12/2013 7:24 PM, Philip Townsend Lontz wrote: >>> The user book says 14vdc... I have a reg. power supply that does,15.000 >>> vdc. Is that going to be a problem? >>> Phil >>> >>> Non judgement day is near > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
