Thank you Don... Non judgement day is near
On May 12, 2013, at 5:41 PM, Don Wilhelm <[email protected]> wrote: > Phil, > > Exceeding the specifications with any equipment is "at your own peril" with > any equipment. > Although I doubt that 15 volts will cause a problem with the KX1, the > regulators will generate more heat than the design point predicts - and there > may be other consequences. > > A few diodes in the power cable for that power source will drop the voltage > down, or choose another supply. Some power supplies can be adjusted for > output voltage, but I suspect you have a sealed power supply that was > intended for a computer, so do what you have to to remain is spec. > > 73, > Don W3FPR > > On 5/12/2013 7:24 PM, Philip Townsend Lontz wrote: >> The user book says 14vdc... I have a reg. power supply that does,15.000 vdc. >> Is that going to be a problem? >> Phil >> >> Non judgement day is near >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
