David,
I believe the QRQ mode is to fix an apparent change in weighting (or
some other timing consideration) of the dots and dashes as the speed is
increased.
It has nothing to do with the T/R switching, and you should find that to
follow the keying quite nicely at whatever speed you are sending. When
you get the K3, give it a try in VOX mode and then draw your own
conclusions.
Yes, you can run with PTT in CW if you prefer.
73,
Don W3FPR
On 4/13/2014 1:08 PM, David Cole wrote:
I know that if I try full breakin with the Pro3, I get the first
character chopped a bit...
Which brings up my solution to all of this for the Pro3...
I do not run breakin. I set the delay for T/R switching to about .5
seconds. That keeps the transmitter keyed all the time I am sending...
Will I see the distorted CW problem using that mode with the K3?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
