The headphone jack should be unrelated to the mic
config header and the KSB2 board. Why do you think
you need a new headphone jack, Frank?
Phil W7OX
On 12/6/14 5:47 PM, Frank Krozel wrote:
So guess replacing my “headphone jack” will be a
part of this process as well.
Frank
On Dec 6, 2014, at 7:39 PM, Matt VK2RQ
<[email protected]
<mailto:[email protected]>> wrote:
The “missing” PCB header is supplied with the
KSB2 SSB option module. If you order a MH2
microphone, you’ll get a packet of PC-style
jumpers to bridge the header. Otherwise, if you
use a different type of microphone, you need to
take care for the jumping yourself. The “UNPCB”
guy sells a nice jumpering PCB that allows you
to easily change the jumper setup for a range
of standard mics, suggest you look it up below
(look for “Internal Mic Adaptor”):
http://www.unpcbs.com/
73, Matt VK2RQ.
On 7 Dec 2014, at 12:36 pm, Frank Krozel
<[email protected]
<mailto:[email protected]>> wrote:
All I “see” are pc holes that are unpopulated.
I am thinking there is a header missing or
similar.
I was kind of looking for a jumper block.
Frank'
On Dec 6, 2014, at 7:27 PM, Phil Wheeler
<[email protected] <mailto:[email protected]>>
wrote:
Frank, for the K2 (I think that's the rig you
mean) the info you need is in this document
"ELECRAFT KSB2 S SB ADAPTER
Assembly and Operating Instructions". Near
the end is the info for configuring it for
various mics.
When you said "Mine was inoperative when I
got it used" do you mean on SSB or
completely? Does it have the KSB2 option
installed?
73, Phil W7OX
On 12/6/14 5:20 PM, Frank Krozel wrote:
Guys, I am about ready to place an order to
Elecraft and one of the items I will be
needing are a few of the connectors like P3,
P6, and the headphone jack. Mine was
inoperative when I got it used..
Where is the jumper block for the mic? Been
staring at the pictures and cannot find the
manual where it shows where the jumper block is.
I guess it is on the control panel but
cannot find any picture of that in case I
need some additional connectors.
(I got it used and it is in perfect condition!!)
Frank KG9H
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
