Yep, I believe it is p/n 620028 Frank On Dec 6, 2014, at 8:01 PM, Matt VK2RQ <[email protected]> wrote:
> When you place your order, mention in the comments section that you want a > headphone jack or two (email parts at elecraft dot com to get the part > number/pricing). When I bought my K2 I ordered an extra headphone jack as a > spare because I heard they can wear out after some time. > > 73, > Matt VK2RQ > > On 7 Dec 2014, at 12:52 pm, Frank Krozel <[email protected]> wrote: > >> Oh, it was broken and sold that way to me.. In order to hear “something” out >> of the speaker, you have to insert a headphone into the hole about 1/2 way >> lol >> Frank >> >> On Dec 6, 2014, at 7:49 PM, Phil Wheeler <[email protected]> wrote: >> >>> The headphone jack should be unrelated to the mic config header and the >>> KSB2 board. Why do you think you need a new headphone jack, Frank? >>> >>> Phil W7OX >>> >>> On 12/6/14 5:47 PM, Frank Krozel wrote: >>>> So guess replacing my “headphone jack” will be a part of this process as >>>> well. >>>> Frank >>>> >>>> On Dec 6, 2014, at 7:39 PM, Matt VK2RQ <[email protected]> wrote: >>>> >>>>> The “missing” PCB header is supplied with the KSB2 SSB option module. If >>>>> you order a MH2 microphone, you’ll get a packet of PC-style jumpers to >>>>> bridge the header. Otherwise, if you use a different type of microphone, >>>>> you need to take care for the jumping yourself. The “UNPCB” guy sells a >>>>> nice jumpering PCB that allows you to easily change the jumper setup for >>>>> a range of standard mics, suggest you look it up below (look for >>>>> “Internal Mic Adaptor”): >>>>> http://www.unpcbs.com/ >>>>> >>>>> >>>>> 73, Matt VK2RQ. >>>>> >>>>>> On 7 Dec 2014, at 12:36 pm, Frank Krozel <[email protected]> wrote: >>>>>> >>>>>> All I “see” are pc holes that are unpopulated. I am thinking there is a >>>>>> header missing or similar. >>>>>> I was kind of looking for a jumper block. >>>>>> Frank' >>>>>> On Dec 6, 2014, at 7:27 PM, Phil Wheeler <[email protected]> wrote: >>>>>> >>>>>>> Frank, for the K2 (I think that's the rig you mean) the info you need >>>>>>> is in this document "ELECRAFT KSB2 S SB ADAPTER >>>>>>> Assembly and Operating Instructions". Near the end is the info for >>>>>>> configuring it for various mics. >>>>>>> >>>>>>> When you said "Mine was inoperative when I got it used" do you mean on >>>>>>> SSB or completely? Does it have the KSB2 option installed? >>>>>>> >>>>>>> 73, Phil W7OX >>>>>>> >>>>>>> On 12/6/14 5:20 PM, Frank Krozel wrote: >>>>>>>> Guys, I am about ready to place an order to Elecraft and one of the >>>>>>>> items I will be needing are a few of the connectors like P3, P6, and >>>>>>>> the headphone jack. Mine was inoperative when I got it used.. >>>>>>>> Where is the jumper block for the mic? Been staring at the pictures >>>>>>>> and cannot find the manual where it shows where the jumper block is. >>>>>>>> I guess it is on the control panel but cannot find any picture of that >>>>>>>> in case I need some additional connectors. >>>>>>>> (I got it used and it is in perfect condition!!) >>>>>>>> Frank KG9H >>> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
