Got it.
BTW this item
http://www.unpcbs.com/adaptor/
mentioned by Dick in an earlier post is a 3rd part K2 mod which is very nice to
have. It lets you change the mic configuration without a major disassembly of
the K2. Only one side panel needs removing once this mod is in place.
Phil W7OX
On 12/6/14 5:52 PM, Frank Krozel wrote:
Oh, it was broken and sold that way to me.. In
order to hear “something” out of the speaker,
you have to insert a headphone into the hole
about 1/2 way lol
Frank
On Dec 6, 2014, at 7:49 PM, Phil Wheeler
<[email protected] <mailto:[email protected]>>
wrote:
The headphone jack should be unrelated to the
mic config header and the KSB2 board. Why do
you think you need a new headphone jack, Frank?
Phil W7OX
On 12/6/14 5:47 PM, Frank Krozel wrote:
So guess replacing my “headphone jack” will be
a part of this process as well.
Frank
On Dec 6, 2014, at 7:39 PM, Matt VK2RQ
<[email protected]
<mailto:[email protected]>> wrote:
The “missing” PCB header is supplied with the
KSB2 SSB option module. If you order a MH2
microphone, you’ll get a packet of PC-style
jumpers to bridge the header. Otherwise, if
you use a different type of microphone, you
need to take care for the jumping yourself.
The “UNPCB” guy sells a nice jumpering PCB
that allows you to easily change the jumper
setup for a range of standard mics, suggest
you look it up below (look for “Internal Mic
Adaptor”):
http://www.unpcbs.com/
73, Matt VK2RQ.
On 7 Dec 2014, at 12:36 pm, Frank Krozel
<[email protected]
<mailto:[email protected]>> wrote:
All I “see” are pc holes that are
unpopulated. I am thinking there is a
header missing or similar.
I was kind of looking for a jumper block.
Frank'
On Dec 6, 2014, at 7:27 PM, Phil Wheeler
<[email protected]
<mailto:[email protected]>> wrote:
Frank, for the K2 (I think that's the rig
you mean) the info you need is in this
document "ELECRAFT KSB2 S SB ADAPTER
Assembly and Operating Instructions". Near
the end is the info for configuring it for
various mics.
When you said "Mine was inoperative when I
got it used" do you mean on SSB or
completely? Does it have the KSB2 option
installed?
73, Phil W7OX
On 12/6/14 5:20 PM, Frank Krozel wrote:
Guys, I am about ready to place an order
to Elecraft and one of the items I will be
needing are a few of the connectors like
P3, P6, and the headphone jack. Mine was
inoperative when I got it used..
Where is the jumper block for the mic?
Been staring at the pictures and cannot
find the manual where it shows where the
jumper block is.
I guess it is on the control panel but
cannot find any picture of that in case I
need some additional connectors.
(I got it used and it is in perfect
condition!!)
Frank KG9H
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
