First question that came to my mind when I saw the announcement was whether the KRX3 had to be removed and reinstalled in order to replace the synths. I found installing the KRX3 exasperating when I assembled the K3 - success came on about the 12th try.
My K3 is 100 miles from where I am right now, so I looked at the photos in the K3 assembly manual and those in the new synth instructions, from which it appears that the swap could be done without removing the KRX3. Could we confirm whether R&R is required? Message below says it is. If the sub does have to be R&R¹d, anyone have suggestions about how to reinstall it without the major fuss I experienced? Ted, KN1CBR > >------------------------------ > >Date: Fri, 13 Feb 2015 13:21:20 -0800 >From: Richard Thorpe <[email protected]> >To: Elecraft List <[email protected]> >Subject: [Elecraft] More KSYN3A >Message-ID: <[email protected]> >Content-Type: text/plain; charset=utf-8 > >I talked to Elecraft and you must remove the second receiver not just >unplug it and remove its ?old? synth board. . . . > >R Thorpe K6CG > >------------------------------ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
