It is quite easy to swap the synthesizer boards without removing the KRX3 module. I did it blindfolded with a long-haired cat on my lap and the latest Tom Petty album blasting away.
Wayne N6KR On Feb 14, 2015, at 12:38 PM, "Joe Subich, W4TV" <[email protected]> wrote: > > I doubt it ... there is not all that much room between the front > bulkhead and the edge of the KRX3 case. In addition, Wayne mentioned > the need to reroute some of the cables with may not be possible if > the KRX3 is in place. > > 73, > > ... Joe, W4TV > > > On 2015-02-14 10:33 AM, Ken K3IU wrote: >> I believe that you should ne able to install both boards without >> removing the KRX3 >> 73, Ken K3IU >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> On 2/14/2015 10:03 AM, Dauer, Edward wrote: >>> First question that came to my mind when I saw the announcement was >>> whether the KRX3 had to be removed and reinstalled in order to replace >>> the >>> synths. I found installing the KRX3 exasperating when I assembled the K3 >>> - success came on about the 12th try. >>> >>> My K3 is 100 miles from where I am right now, so I looked at the >>> photos in >>> the K3 assembly manual and those in the new synth instructions, from >>> which >>> it appears that the swap could be done without removing the KRX3. Could >>> we confirm whether R&R is required? Message below says it is. >>> >>> If the sub does have to be R&R¹d, anyone have suggestions about how to >>> reinstall it without the major fuss I experienced? >>> >>> >>> Ted, KN1CBR >>> >>> >>>> ------------------------------ >>>> >>>> Date: Fri, 13 Feb 2015 13:21:20 -0800 >>>> From: Richard Thorpe <[email protected]> >>>> To: Elecraft List <[email protected]> >>>> Subject: [Elecraft] More KSYN3A >>>> Message-ID: <[email protected]> >>>> Content-Type: text/plain; charset=utf-8 >>>> >>>> I talked to Elecraft and you must remove the second receiver not just >>>> unplug it and remove its ?old? synth board. . . . >>>> >>>> R Thorpe K6CG >>>> >>>> ------------------------------ >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [email protected] >>> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
