I doubt it ... there is not all that much room between the front
bulkhead and the edge of the KRX3 case.  In addition, Wayne mentioned
the need to reroute some of the cables with may not be possible if
the KRX3 is in place.

73,

  ... Joe, W4TV


On 2015-02-14 10:33 AM, Ken K3IU wrote:
I believe that you should ne able to install both boards without
removing the KRX3
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 2/14/2015 10:03 AM, Dauer, Edward wrote:
First question that came to my mind when I saw the announcement was
whether the KRX3 had to be removed and reinstalled in order to replace
the
synths.  I found installing the KRX3 exasperating when I assembled the K3
- success came on about the 12th try.

My K3 is 100 miles from where I am right now, so I looked at the
photos in
the K3 assembly manual and those in the new synth instructions, from
which
it appears that the swap could be done without removing the KRX3.  Could
we confirm whether R&R is required?  Message below says it is.

If the sub does have to be R&R¹d, anyone have suggestions about how to
reinstall it without the major fuss I experienced?


Ted, KN1CBR


------------------------------

Date: Fri, 13 Feb 2015 13:21:20 -0800
From: Richard Thorpe <[email protected]>
To: Elecraft List <[email protected]>
Subject: [Elecraft] More KSYN3A
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8

I talked to Elecraft and you must remove the second receiver not just
unplug it and remove its ?old? synth board.  . . .

R Thorpe K6CG

------------------------------
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to