I'd definitely buy a second P3 for my sub-RX if the IF Out was on the back panel and it was incorporated into the firmware...
______________________ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 7/1/2016 5:04 PM, Bill Frantz wrote: > Thanks Don. > > Part of my reasoning for posting was that this feature might increase > sales of P3s. Given the relative lack of interest, I think it remains > a user mod. (But my K3 might look nice with 2 P3s on top of it. :-) > > 73 Bill AE6JV > > On 7/1/16 at 5:28 AM, [email protected] (Don Wilhelm) wrote: > >> Bill, >> >> Getting the IF output from the subRX is not a problem, but adding the >> 'new protocols' would likely be a problem. >> >> So if you just want to monitor the band around wherever the subRX is >> tuned, that part is easy, just add an IF output to the subRX. I have >> done that to one customer's K3, it is not difficult. >> >> 73, >> Don W3FPR >> >> On 7/1/2016 1:49 AM, Bill Frantz wrote: >>> One of our field day operators announced that while he was making >>> QSOs on active bands, he was going to use the sub receiver in his K3 >>> to scan for 10M CW activity. It occurred to me that this kind of >>> scanning would be a lot easier if you could attach a second P3 to >>> the K3 sub receiver. >>> >>> It seems simple. You would need an IF out from the sub receiver, and >>> some new protocols on the aux bus. e.g. QSY on the sub P3 QSYs the >>> sub receiver. etc. >>> >> > ----------------------------------------------------------------------- > Bill Frantz |The nice thing about standards| Periwinkle > (408)356-8506 |is there are so many to choose| 16345 Englewood Ave > www.pwpconsult.com |from. - Andrew Tanenbaum | Los Gatos, CA 95032 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
