All of the suggestions made about the cable and the COM settings are valid. I'd like to add one more: the type of RS-232 hardware in your computer. I could never get my K2 to run with RS-232 dongle (this was before the K3 dongle was available) and have used a "real" RS-232 card in the shack computer. I think the FTDI chipsets are better, but even those I could not get to work.
If you are seeing the frequency reflected in N1MM, then your data com between the K2 and the computer is fine. What little contesting I've done using N1MM I have found to work fine with my setup. Data com issues are notorious to track down. Good luck and keep at it. Clark WU4B -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-FD-and-N1MM-tp7619756p7619802.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
