Can't help but wonder, is anyone adjusting the recording and playback in
Windows?
Mine works fine by adjusting those. I don't do any vhf though.
73 Dwight NS9I
On 6/26/2017 7:59 PM, Jim Rogers wrote:
Richard - I second your report, there is no fine adjustment for the
USB audio on the K3s either in received audio or transmitted audio.
When the band is noisy, I have to reduce LIN OUT to 01 or
alternatively reduce the overall system gain with the RF gain (which
in the case of the K3 and K3s is IF gain).
When operating meteor scatter on 2M with an Elecraft K144XV
transverter I had to reduce the audio drive from the JT65 software to
50% to prevent RF power out overshoot and hunting, typical in
over-driven closed loop systems. This allowed me to advance LIN IN and
the end result was the power detection system of the K3s settled down.
There are work-arounds.
Jim, W4ATK
K-Line, K2/10
On 6/26/2017 6:11 PM, Christopher Hoover wrote:
USB audio with the default settings has been fine for me from the first
day. Check your settings?
On Thu, Jun 22, 2017 at 10:31 AM, Dick via Elecraft <
elecraft@mailman.qth.net> wrote:
Hello Elecraft,
When feeding the audio from the K3S USB port to the CPU, the K3S audio
level is extremely high and way too hot for good performance on many
digital
modes.
Example, even with my CPU's sound card set at the lowest possible
level of
"01" my K3S is hitting the JT-65 software with a super strong signal
that
is much higher than the software wants to see and performance is
degraded.
The same is true when operating RTTY using MMTTY or 2Tone software.
The USB audio output on the K3S needs to be adjustable in the K3S
Menu as
it was on the K3 Serial port.
I wrote to you a few months ago about this without a positive reply.
Please address this serious issue.
Thank you-
Richard Van Zandt- K9OM
In a message dated 6/2/2017 7:28:48 P.M. Central Daylight Time,
elecraft-requ...@mailman.qth.net writes:
If you are using Line Out with a fixed gain setting to feed audio to
WSJT-X, adjusting the AF control will not do anything. What I do is
leave
my RF gain control at its normal position (around 3 o'clock) and
use the
slider at the lower left in the WSJT-X window to compensate for gain
variations.
73,
Rich VE3KI
W3FPR wrote:
Bret,
You may have better luck with running the RF Gain full and adjusting
with the AF gain. That way the RX AGC will smooth out variations
in the
signal level.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to c...@murgatroid.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jim.w4...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@bayland.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com