Bert and all,
Use software PTT in the applications while W4TV figures out what is
going on with the MicorHam gear.
Are all those having a similar problem using MicroHam something? or does
it occur with other interfaces.
73,
Don W3FPR
On 11/13/2017 7:00 PM, Bert Garcia N8NN wrote:
The CAT and PTT are on different COM ports, per the installation instructions
for the microKEYER II when using WSTJ-X. And it's not a stray RF problem as I
have all the equipment bonded together, ferrite cores on the audio and control
lines, a line isolator in the feedline where it enters the house, and line
isolators between the rig and amp and between the amp and antenna tuner. The
lockup happens when running only 30 watts with FT8. It never happens when
running a KW on many other modes. I run RTTY, PSK and other digital modes with
no problems.
Thus, I suspect the issue is associated with the WSRJ-X software as the same
issue occurs with various transceivers in multiple locations.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
