Tnx John …. I guess a better option might be to just buy a VGA Y-Adapter rather than make one up and have to do all that soldering …
Don, N5LZ Sent from Mail for Windows 10 From: [email protected] Sent: Monday, February 12, 2018 12:16 PM To: [email protected] Subject: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500 Yes a Y will work. I have had a MicroHAM keyer, a Top Ten Band Decoder and a KPA500 all connected to the same ACC jack. John KK9A Don Butler n5lz at comcast.net Mon Feb 12 12:31:13 EST 2018 I've been studying the manual while waiting for my new KPA-1500 to ship ... I see that the KPAK3AUX cable must run from AUX on the amp to ACC on the K3S. In my case I already have a microHAM MK2R+ cable connected to the K3S ACC (providing band data for switching bandpass filters). I'm thinking that I can build a Y-Adapter cable assembly with DB-15s to run from the K3S ACC and split (1) to KPAK3AUX and on to the KPA-1500 AUX . and (2) to the MK2R+ ACC cable. Will that work? Will conflicts with KPA-1500 or MK2R+ be created? Thanks, Don, N5LZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
