What about if you have the earlier Y-Box and have a KPA500 on it already? How do you add the KPA1500? Tnx N2TK, Tony
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob Wilson, N6TV Sent: Monday, February 12, 2018 2:50 PM To: [email protected] Subject: Re: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500 On Mon, Feb 12, 2018 at 11:41 AM, [email protected] <[email protected]> wrote: > Don't use VGA products. Elecraft sells a Y adapter that will work > perfectly and N6TV sells a Y-Box to connect up to four devices to the ACC. > > John KK9A > Correct, plus with the new version 2.1 Y-BOX, you don't have to purchase a KPAK3AUX cable to connect the KPA1500. A $10 MF 15-pin cable (not a VGA cable) will work fine because the internal wiring of the Y-BOX v2.1 matches the Elecraft custom cable wiring wiring. It also adds a feature so you can power up the KPA1500 remotely with a K3 macro (something not supported by Y-adapters with an unmodified KPAK3AUX cable). See https://bit.ly/Y-BOX 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
