Mark,
Get out of the CAL FIL menu and see if it does toggle the bar when in CW
mode. In SSB mode, it should toggle between LSB and USB.
If it works in SSB mode, but not in CW, you may have a display fault
that is not showing the bar - that is a different problem.
73,
Don W3FPR
On 6/10/2018 4:44 PM, Mark Petrovic wrote:
Thanks, Don. In CAL FIL mode, holding CW RV does not toggle a bar
over the "c". All my calibrations and tests have gone swimmingly til
now. Any suggestions on where to start to troubleshoot this? Is
there another way to verify if the toggle is being honored (could the
over-bar LCD element be bad?)?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
