Don, thanks. When I exit CAL FIL, and press and hold CW RV, I see "ST P 0.60" displayed (with the B RIT and XIT annunciators on) whether in CW, USB or LSB mode.
On Sun, Jun 10, 2018 at 2:21 PM, Don Wilhelm <[email protected]> wrote: > Mark, > > Get out of the CAL FIL menu and see if it does toggle the bar when in CW > mode. In SSB mode, it should toggle between LSB and USB. > If it works in SSB mode, but not in CW, you may have a display fault that > is not showing the bar - that is a different problem. > > 73, > Don W3FPR > > > On 6/10/2018 4:44 PM, Mark Petrovic wrote: > >> Thanks, Don. In CAL FIL mode, holding CW RV does not toggle a bar over >> the "c". All my calibrations and tests have gone swimmingly til now. Any >> suggestions on where to start to troubleshoot this? Is there another way >> to verify if the toggle is being honored (could the over-bar LCD element be >> bad?)? >> > > -- Mark ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
