John, Thanks. That set up works.
73, Jim > On Nov 22, 2018, at 2:18 PM, John Simmons <[email protected]> wrote: > > Jim, > > I have this exact setup and used it with success in the CW SS contest. Here's > what you need to know once you have the K3S talking to N1MM: > > On the K3S, navigate to the 'PTT-KEY' Config option and set it to 'rts-dtr'. > Leave VOX turned off. > > In N1MM: > <image.png> > with the port to match your K3S and SOxx set as desired, then: > > <image.png> > > N1MM will send PTT and CW via the USB port. I have a K3 (not S) but the only > difference in this case is your radio has a built-in USB to serial converter. > > 73, > -John NI0K > > > Jim Cary wrote on 11/22/2018 10:46 AM: >> I’m trying to get my K3S and N1MM+ to work on cw without an interface (which >> I have used in the past). I’ve tried a couple of the suggestions I’ve seen >> on the reflector but none of them seem to work. >> >> I’m sure someone has figured out an easy way to do this and would appreciate >> the info. >> >> Thanks, >> >> Jim >> W2SM >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> <http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >> Post: mailto:[email protected] <mailto:[email protected]> >> >> This list hosted by: http://www.qsl.net <http://www.qsl.net/> >> Please help support this email list: http://www.qsl.net/donate.html >> <http://www.qsl.net/donate.html> >> Message delivered to [email protected] >> <mailto:[email protected]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
