Mike,
All that is fine for CW, but for playing WAV files (I assume audio for
SSB mode), you have to have a connection from the computer soundcard to
the K2 Microphone input. There is no other way to get SSB audio into
the K2.
OTOH, if the WAV file is for keying the Winkeyer in CW mode, that would
be a question to be directed at K1EL - I did not think you could create
CW from a WAV file, but if possible it would have to be done in the
WinKeyer - it is not a K2 consideration.
A BTW note - I hope you are plugging that USB to serial adapter directly
into the K2 AUX IO connector. You MUST use the special cable for the K2
to PC. Plugging a full RS232 port into the K2 AUX IO connector may
cause damage to the K2 and will cause strange behaviors. Only 3 pins of
the K2 connector are RS-232. The remaining ones are internal K2 signal
lines to be used for communicating with external Elecraft gear such as
the transverters, the KAT100, and KRC2.
73,
Don W3FPR
On 3/4/2020 4:34 PM, Mike Kopacki wrote:
The WinKeyer is connected to the USB port on the tablet. There is a USB to
serial cable from the WinKeyer to K2. The cable was from K1EL who makes the
WinKeyer.
Thanks,
Mike
On Mar 4, 2020, at 3:18 PM, Don Wilhelm <[email protected]> wrote:
Mike,
Please describe your method of connecting the computer soundcard output to the
K2 Microphone jack.
73,
Don W3FPR
On 3/4/2020 3:05 PM, NJMike wrote:
I am using a Windows 10 tablet, connected to a WinKeyer USB box and then to
an Elecraft K2. I use N1MM+ Logger for my logging software.
This setup is working fine on CW. Now I am trying to play a WAV file
assigned to a function key in N1MM. It plays fine on the tablet but is
not being sent to the K2.
I have exhausted all user manuals and not come up with the answer. Any help
will be appreciated!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
