Thanks, Don. I was afraid that it was going to be a hardware issue. BTW, I am using the USB to serial cable specifically made for the K2 by K1EL.
So I guess I need to find out out how to make a connection from the soundcard to the mic input. Thanks, Mike > On Mar 4, 2020, at 4:57 PM, Don Wilhelm <[email protected]> wrote: > > Mike, > > All that is fine for CW, but for playing WAV files (I assume audio for SSB > mode), you have to have a connection from the computer soundcard to the K2 > Microphone input. There is no other way to get SSB audio into the K2. > > OTOH, if the WAV file is for keying the Winkeyer in CW mode, that would be a > question to be directed at K1EL - I did not think you could create CW from a > WAV file, but if possible it would have to be done in the WinKeyer - it is > not a K2 consideration. > > A BTW note - I hope you are plugging that USB to serial adapter directly into > the K2 AUX IO connector. You MUST use the special cable for the K2 to PC. > Plugging a full RS232 port into the K2 AUX IO connector may cause damage to > the K2 and will cause strange behaviors. Only 3 pins of the K2 connector are > RS-232. The remaining ones are internal K2 signal lines to be used for > communicating with external Elecraft gear such as the transverters, the > KAT100, and KRC2. > > 73, > Don W3FPR > >> On 3/4/2020 4:34 PM, Mike Kopacki wrote: >> The WinKeyer is connected to the USB port on the tablet. There is a USB to >> serial cable from the WinKeyer to K2. The cable was from K1EL who makes the >> WinKeyer. >> >> Thanks, >> Mike >> >>>> On Mar 4, 2020, at 3:18 PM, Don Wilhelm <[email protected]> wrote: >>> >>> Mike, >>> >>> Please describe your method of connecting the computer soundcard output to >>> the K2 Microphone jack. >>> >>> 73, >>> Don W3FPR >>> >>> >>>> On 3/4/2020 3:05 PM, NJMike wrote: >>>> I am using a Windows 10 tablet, connected to a WinKeyer USB box and then to >>>> an Elecraft K2. I use N1MM+ Logger for my logging software. >>>> This setup is working fine on CW. Now I am trying to play a WAV file >>>> assigned to a function key in N1MM. It plays fine on the tablet but is >>>> not being sent to the K2. >>>> I have exhausted all user manuals and not come up with the answer. Any >>>> help >>>> will be appreciated! >>>> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
