No problem Don. We all do it at some time or other. 73, Mark, WB9CIF
-----Original Message----- From: Don Wilhelm <[email protected]> Sent: Wednesday, March 4, 2020 22:41 To: Mark Musick <[email protected]>; Mike Kopacki <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] Unable to send WAV file to K2 Mark, YES, that is what I meant. The fingers did not catch up with the mind - a sign of aging! 73, Don W3FPR On 3/4/2020 5:34 PM, Mark Musick wrote: > Mike, > Don's message said: > A BTW note - I hope you are plugging that USB to serial adapter directly into > the K2 AUX IO connector. > I think he meant to say "I hope you are NOT plugging that USB to serial > adapter directly into the K2 AUX IO connector." > > 73, > Mark, WB9CIF > > -----Original Message----- > From: [email protected] > <[email protected]> On Behalf Of Don Wilhelm > Sent: Wednesday, March 4, 2020 21:57 > To: Mike Kopacki <[email protected]> > Cc: [email protected] > Subject: Re: [Elecraft] Unable to send WAV file to K2 > > Mike, > > All that is fine for CW, but for playing WAV files (I assume audio for SSB > mode), you have to have a connection from the computer soundcard to the K2 > Microphone input. There is no other way to get SSB audio into the K2. > > OTOH, if the WAV file is for keying the Winkeyer in CW mode, that would be a > question to be directed at K1EL - I did not think you could create CW from a > WAV file, but if possible it would have to be done in the WinKeyer - it is > not a K2 consideration. > > A BTW note - I hope you are plugging that USB to serial adapter directly into > the K2 AUX IO connector. You MUST use the special cable for the K2 to PC. > Plugging a full RS232 port into the K2 AUX IO connector may cause damage to > the K2 and will cause strange behaviors. Only 3 pins of the K2 connector are > RS-232. The remaining ones are internal K2 signal lines to be used for > communicating with external Elecraft gear such as the transverters, the > KAT100, and KRC2. > > 73, > Don W3FPR > > On 3/4/2020 4:34 PM, Mike Kopacki wrote: >> The WinKeyer is connected to the USB port on the tablet. There is a USB to >> serial cable from the WinKeyer to K2. The cable was from K1EL who makes the >> WinKeyer. >> >> Thanks, >> Mike >> >>> On Mar 4, 2020, at 3:18 PM, Don Wilhelm <[email protected]> wrote: >>> >>> Mike, >>> >>> Please describe your method of connecting the computer soundcard output to >>> the K2 Microphone jack. >>> >>> 73, >>> Don W3FPR >>> >>> >>>> On 3/4/2020 3:05 PM, NJMike wrote: >>>> I am using a Windows 10 tablet, connected to a WinKeyer USB box and >>>> then to an Elecraft K2. I use N1MM+ Logger for my logging software. >>>> This setup is working fine on CW. Now I am trying to play a WAV >>>> file assigned to a function key in N1MM. It plays fine on the >>>> tablet but is not being sent to the K2. >>>> I have exhausted all user manuals and not come up with the answer. >>>> Any help will be appreciated! >>>> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
