They say that memory is the second thing to go when you get older. On Wed, Mar 4, 2020 at 17:40 Don Wilhelm <[email protected]> wrote:
> Mark, > > YES, that is what I meant. The fingers did not catch up with the mind - > a sign of aging! > > 73, > Don W3FPR > > On 3/4/2020 5:34 PM, Mark Musick wrote: > > Mike, > > Don's message said: > > A BTW note - I hope you are plugging that USB to serial adapter directly > into the K2 AUX IO connector. > > I think he meant to say "I hope you are NOT plugging that USB to serial > adapter directly into the K2 AUX IO connector." > > > > 73, > > Mark, WB9CIF > > > > -----Original Message----- > > From: [email protected] <[email protected]> > On Behalf Of Don Wilhelm > > Sent: Wednesday, March 4, 2020 21:57 > > To: Mike Kopacki <[email protected]> > > Cc: [email protected] > > Subject: Re: [Elecraft] Unable to send WAV file to K2 > > > > Mike, > > > > All that is fine for CW, but for playing WAV files (I assume audio for > SSB mode), you have to have a connection from the computer soundcard to the > K2 Microphone input. There is no other way to get SSB audio into the K2. > > > > OTOH, if the WAV file is for keying the Winkeyer in CW mode, that would > be a question to be directed at K1EL - I did not think you could create CW > from a WAV file, but if possible it would have to be done in the WinKeyer - > it is not a K2 consideration. > > > > A BTW note - I hope you are plugging that USB to serial adapter directly > into the K2 AUX IO connector. You MUST use the special cable for the K2 to > PC. Plugging a full RS232 port into the K2 AUX IO connector may cause > damage to the K2 and will cause strange behaviors. Only 3 pins of the K2 > connector are RS-232. The remaining ones are internal K2 signal lines to > be used for communicating with external Elecraft gear such as the > transverters, the KAT100, and KRC2. > > > > 73, > > Don W3FPR > > > > On 3/4/2020 4:34 PM, Mike Kopacki wrote: > >> The WinKeyer is connected to the USB port on the tablet. There is a USB > to serial cable from the WinKeyer to K2. The cable was from K1EL who makes > the WinKeyer. > >> > >> Thanks, > >> Mike > >> > >>> On Mar 4, 2020, at 3:18 PM, Don Wilhelm <[email protected]> > wrote: > >>> > >>> Mike, > >>> > >>> Please describe your method of connecting the computer soundcard > output to the K2 Microphone jack. > >>> > >>> 73, > >>> Don W3FPR > >>> > >>> > >>>> On 3/4/2020 3:05 PM, NJMike wrote: > >>>> I am using a Windows 10 tablet, connected to a WinKeyer USB box and > >>>> then to an Elecraft K2. I use N1MM+ Logger for my logging software. > >>>> This setup is working fine on CW. Now I am trying to play a WAV > >>>> file assigned to a function key in N1MM. It plays fine on the > >>>> tablet but is not being sent to the K2. > >>>> I have exhausted all user manuals and not come up with the answer. > >>>> Any help will be appreciated! > >>>> > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- 72, Rich Hurd / WC3T / DMR: 3142737 Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
