Mike, Don's message said: A BTW note - I hope you are plugging that USB to serial adapter directly into the K2 AUX IO connector. I think he meant to say "I hope you are NOT plugging that USB to serial adapter directly into the K2 AUX IO connector."
73, Mark, WB9CIF -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Don Wilhelm Sent: Wednesday, March 4, 2020 21:57 To: Mike Kopacki <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] Unable to send WAV file to K2 Mike, All that is fine for CW, but for playing WAV files (I assume audio for SSB mode), you have to have a connection from the computer soundcard to the K2 Microphone input. There is no other way to get SSB audio into the K2. OTOH, if the WAV file is for keying the Winkeyer in CW mode, that would be a question to be directed at K1EL - I did not think you could create CW from a WAV file, but if possible it would have to be done in the WinKeyer - it is not a K2 consideration. A BTW note - I hope you are plugging that USB to serial adapter directly into the K2 AUX IO connector. You MUST use the special cable for the K2 to PC. Plugging a full RS232 port into the K2 AUX IO connector may cause damage to the K2 and will cause strange behaviors. Only 3 pins of the K2 connector are RS-232. The remaining ones are internal K2 signal lines to be used for communicating with external Elecraft gear such as the transverters, the KAT100, and KRC2. 73, Don W3FPR On 3/4/2020 4:34 PM, Mike Kopacki wrote: > The WinKeyer is connected to the USB port on the tablet. There is a USB to > serial cable from the WinKeyer to K2. The cable was from K1EL who makes the > WinKeyer. > > Thanks, > Mike > >> On Mar 4, 2020, at 3:18 PM, Don Wilhelm <[email protected]> wrote: >> >> Mike, >> >> Please describe your method of connecting the computer soundcard output to >> the K2 Microphone jack. >> >> 73, >> Don W3FPR >> >> >>> On 3/4/2020 3:05 PM, NJMike wrote: >>> I am using a Windows 10 tablet, connected to a WinKeyer USB box and >>> then to an Elecraft K2. I use N1MM+ Logger for my logging software. >>> This setup is working fine on CW. Now I am trying to play a WAV >>> file assigned to a function key in N1MM. It plays fine on the >>> tablet but is not being sent to the K2. >>> I have exhausted all user manuals and not come up with the answer. >>> Any help will be appreciated! >>> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
