I might add that the computer is an old Win7 desktop running Win10. Definitely not a powerhouse. :-)
73, Brian, K0DTJ > On Oct 14, 2022, at 14:40, Brian Hunt <[email protected]> wrote: > > I have been using a USB-to-serial converter cable for connection between the > K3 and computer running N1MM+. I use DTR keying on the K3 with VOX and QSK > on. This leaves the K3 internal keyer and paddle free to use at a different > speed for fills, etc. > > I have noticed the CW timing from the computer to falter a bit once in a > while depending on what else the computer is doing at the time. I try to > minimize the number of apps running. Typical CW speed is 22-32 wpm so I don’t > know how it would do faster than that. > > 73, > Brian, K0DTJ > >> On Oct 14, 2022, at 07:23, dave arruzza via Elecraft >> <[email protected]> wrote: >> >> To all: >> What is the preferred method of keying and rig control when using a K3 with >> N1MM. >> 73Dave W1CTN >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
