Hi Brian,
I use a Winkeyer between the radio and the PC and that takes care of the
timing issue. Works great!
Bert VE3NR
On 2022-10-14 17:39, Brian Hunt wrote:
I have been using a USB-to-serial converter cable for connection between the K3
and computer running N1MM+. I use DTR keying on the K3 with VOX and QSK on.
This leaves the K3 internal keyer and paddle free to use at a different speed
for fills, etc.
I have noticed the CW timing from the computer to falter a bit once in a while
depending on what else the computer is doing at the time. I try to minimize the
number of apps running. Typical CW speed is 22-32 wpm so I don’t know how it
would do faster than that.
73,
Brian, K0DTJ
On Oct 14, 2022, at 07:23, dave arruzza via Elecraft<[email protected]>
wrote:
To all:
What is the preferred method of keying and rig control when using a K3 with
N1MM.
73Dave W1CTN
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:[email protected]
This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered [email protected]
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:[email protected]
This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
