Thankyou

Sent from my iPhone

> On 2 Nov 2022, at 17:03, Walter Underwood <[email protected]> wrote:
> 
> Yes, the CM500 works just fine on the KX3. I recommend getting an off the 
> shelf stereo splitter cable to get cleaner mic bias and to split out PTT. 
> Details here.
> 
> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
>>> On Nov 2, 2022, at 9:50 AM, Ian Maude via Elecraft 
>>> <[email protected]> wrote:
>>> 
>>> 
>>> 
>>>> On 2 Nov 2022, at 16:19, Ian Maude <[email protected]> wrote:
>>> 
>>> Out of interest, can the CM-500 be used on the KX3?
>>> 
>>> 73 Ian
>>> 
>>>> On 2 Nov 2022, at 16:15, Bob McGraw <[email protected]> wrote:
>>>> 
>>>> Likewise, I'm a retired pro audio engineer, studio and live music.  The 
>>>> CM500 is a very good headset and plugs directly into the rear of the K3S.  
>>>> Turn on the bias.   They are available from Sweetwater Sound (no 
>>>> connection to me) for about $60.  I also use the Koss SB40 ($29 on Amazon) 
>>>> which has a dynamic mike.  One has to be careful with the mike-to-mouth 
>>>> placement as it is a dynamic mike (no bias required) and thus is prone to 
>>>> proximity effects or boosted low end.  Taking a different approach I use a 
>>>> Shure SM-58 ($100) on a boom.  I did make my own XLR-3 to Foster 8 pin 
>>>> cable. Very easy to do and connects to the front panel MIC connector.  No 
>>>> bias required.  I also have used a Behringer XM8500 ($29) with very 
>>>> similar results as the SM-58.  The SM-58, or its like in wireless form,  
>>>> is a very popular stage vocal mike.
>>>> 
>>>> One factor I've observed and stressed is "proper microphone technique".  
>>>> That is proper placement of the microphone with regard to the mouth.  I 
>>>> find many hams have been taught incorrectly in this regard or perhaps do 
>>>> not understand the relationship that exists.  One needs to experiment with 
>>>> a specific mike and their voice in order to attain desired results.   Many 
>>>> dynamic microphones will have proximity effect which will make them bottom 
>>>> heavy or bassy.  Simply back the mike away from the mouth to correct the 
>>>> concern.  Many microphones have extended high end response.  This produces 
>>>> lots of lip and mouth and breath/nasal sounds.  Again, correct placement 
>>>> above the mouth, or to the side or below the mouth usually corrects the 
>>>> concern. And of course, proper adjustment of microphone gain and any 
>>>> compression is mandatory with each mike.
>>>> 
>>>> Jim, K9YC recommendations for TX EQ is an excellent starting point.  In my 
>>>> case, I've tweaked the numbers a wee bit to suit my voice and my 
>>>> microphone choice.
>>>> 
>>>> Listen to your signal by recording it and then playing it back from the 
>>>> various SDR remote receivers around the country.    That way you know how 
>>>> your station sounds.
>>>> 
>>>> 73
>>>> 
>>>> Bob, K4TAX
>>>> 
>>>> 
>>>> On 11/2/2022 9:44 AM, [email protected] wrote:
>>>>> Message: 18
>>>>> Date: Tue, 1 Nov 2022 17:48:31 -0700
>>>>> From: Jim Brown<[email protected]>
>>>>> To:[email protected]
>>>>> Subject: Re: [Elecraft] Recommendation for Microphone for K3s?
>>>>> Message-ID:
>>>>>    <[email protected]>
>>>>> Content-Type: text/plain; charset=UTF-8; format=flowed
>>>>> 
>>>>> I strongly agree with Rick's advice. I'm retired from pro audio, did
>>>>> lots of live recording, still have some great pro mics, but I've been
>>>>> using the CM500 since around 2009. I can't think of a better choice. I
>>>>> find the headphones comfy enough for a long weekend contest, and they
>>>>> sound great!
>>>>> 
>>>>> 73, Jim K9YC
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[email protected]
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to [email protected]
>>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected] 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected] 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to