Bill Coleman N2BC wrote:
This was an issue with the early Orion also. As I understand it, PTT
in CW was eventually implemented on the Orion.
Some of the contesting software will raise PTT and delay a user
specified time before keying to let the T/R switching settle. Also,
on all the YaeCOMWood rigs I have used, releasing PTT returns to RX
'instantly' - cancelling any delay set for semi-breakin.
Not having a QSK amplifier, and not particularly caring for QSK at
all, PTT in CW capability is important to me. I routinely stomp on
the foot switch to eliminate the clatter during CW contacts with my
ICOM rig - been doing this ever since my DX-35 & way to old to change
now.
PLEASE make PTT active on CW in the K3! PLEASE....
It is! The way it works now will allow you to do what you describe.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
