Gary Bartlett VE1RGB wrote:
All functions of K3/100 #095 work flawlessly (within the rig's current
limitations) and the radio now communicates with a laptop for FW
updates. Now for rig control.
Has anyone out there made their K3 work with DX4WIN and/or N1MM that
could either provide the setup parameters, or at least point me in the
direction to find same? If no answer here, then I'll go to the logging
programs sites.
With respect to N1MM, there's nothing to it. Just go to the options
section and select Elecraft K3 as the radio type.
The default baud rate is 4800, but you can change this if you wish; just
change it in the K3's CONFIG menu as well.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
