Don Nesbitt wrote:
Yep - this is true - not only that, but be aware if you are using DTR/RTS to
send code from N1MM (I presume other software as well) that even if you have
NOT turned VOX to the ON position on the K3, the DTR/RTS keying in
conjunction with ENABLING the PTT control in N1MM Config, will put your RF
into the ether when N1MM Function keys are used! Nice - but - read on:
Then, when you reach for your paddle to send a correction nothing will make
it to the air UNLESS you have enabled VOX on the K3! You will wonder why
the other station keeps asking and finally gives up! Been there, done that
and have the T-shirt! 73 -- Don
If you just enable DTR for CW and *not* RTS for PTT, you can avoid this!
The K3 works just fine this way.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
