Julian, Here's what's in the command: PC0500;PC;DS;
I tried it again and I get the same thing. The power cannot be adjusted with the front panel dial past 12 watts. Bill -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian, G4ILO Sent: Friday, October 31, 2008 12:54 PM To: [email protected] Subject: RE: [Elecraft] K3 Firmware 2.58 Bill Johnson-9 wrote: > > Julian, > > I set the power by double clicking in the software. I made no changes to > the config settings so this was definitely a software created change. > > Bill > > I have never disabled the PA intentionally from the menu either. Strange. All the shortcut does is cause the commands: PC0500;PC;DS; to be sent to the radio. You can right-click it and see the commands that are sent, and change them if you want to. The PC0500; sets the power to 5W. The PC; causes the power level to be reported back to the program straight away and the DS; causes the status information to be updated. Only the first command is necessary to set the power. The others are just so you can see the effect immediately. Nothing that is sent should have the effect of disabling the PA permanently. ----- Julian, G4ILO. K2 #392 K3 #222. http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham Directory http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 -- View this message in context: http://n2.nabble.com/K3-Firmware-2.58-tp1437773p1437924.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
