Hi Bill: You have to re-read Ruben's quote. He wants it for his second K3 that does NOT include the RX input which means he does NOT have a KXV3 board. If you take the KXV3 out of the equation his request makes perfect sense.
73, Mike K2MK Bill W4ZV Sat, 11 Apr 2009 03:19:21 -0700 TNX a lot to all for your answer. Main use of it is 160m with 2 beverage and one K3 with second receiver and without RX Input. With this... we want listen the beverage conected to aux input and tx on the 160m vertical. Problem this evening was that we only could listen the second receiver in the right side. We will have to use the hardware solution. I'm still not 100% sure what you are attempting to do but there may be a way without an external splitter. 1. Connect your Beverage to RX ANT. 2. HOLD RX ANT to toggle Sub to MAIN. 3. You will TX on ANT1 and both RXs will use your Beverage on RX ANT via the internal splitter inside the K3. 4. If you want the RX ANT on both ears, go into DIVERSTY and SPLIT. You will TX on the VFO frequency B and RX (both receivers) on VFO frequency A. I use an external splitter so I can feed my Beverage to RX ANT AND AUX RF. Then I can choose both RXs on the Beverage, both RXs on the TX antenna or one on each in DIVERSTY. Here's a previous summary: http://mailman.qth.net/pipermail/elecraft/2008-November/099738.html Although a Magic-T splitter is preferred, you could also use a simple T if you have connected AUX RF to your KRX3. 73, Bill W4ZV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
