On Sat, Apr 11, 2009 at 7:44 AM, K2MK <[email protected]> wrote: > > You have to re-read Ruben's quote. He wants it for his second K3 that does > NOT include the RX input which means he does NOT have a KXV3 board. If you > take the KXV3 out of the equation his request makes perfect sense.
I don't think he has a "second K3". The SO4R expedition only has ONE K3 plus 3 IC-7000s according to their website below. http://www.dxfriends.com/s04r/plans.php I believe he''s saying his KRX3 has not been wired for AUX RF, but it's really not clear. EA5BZ wrote: TNX a lot to all for your answer. > Main use of it is 160m with 2 beverage and one K3 with second receiver > and without RX Input. > With this... we want listen the beverage conected to aux input and tx on > the 160m vertical. > Problem this evening was that we only could listen the second receiver > in the right side. If he has a KXV3 but KRX3 was not wired for AUX RF, what I suggested will allow him to have the RX ANT Beverage applied to both Main and Sub without an external splitter (by using the one internal to the K3).His description is incomplete. Whether he has a KXV3, whether he has a KAT3 and how the KRX3 is wired internally (to AUX RF or to KAT3's ANT2 input) are all unknown but necessary to answer his question. Hopefully the K3 manual descriptions on pages 40-42 of the four different KANT3/KAT3/KXV3 combinations will be enough for him to figure it out himself. 73, Bill W4ZV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
