I thought about that and I guess that must be the case.
Stan Rife W5EWA -----Original Message----- From: Joe Planisky [mailto:jp...@jeffnet.org] Sent: Tuesday, January 12, 2010 3:57 PM To: sr...@swbell.net Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] IF output I don't think you'll hear much of anything on a K2 at 8.215 MHz. That's well outside the 40m passband. The K2 does not have general coverage RX. 73 -- Joe KB8AP On Jan 12, 2010, at 1:05 PM, <sr...@swbell.net> wrote: > I am trying to verify the output at the IF OUT jack on the back of > the K3. I have it connected to my K2 with the VFO set for 8215.00 > and I see > or hear no signal at all. Shouldn't I see the output from the K3? Is > the > signal that low that I won't even get a blip on the K2 receiver? Am I > missing something? I see no menu entry for enabling the IF output. > HELP > > > Stan Rife > W5EWA > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.725 / Virus Database: 270.14.136/2616 - Release Date: 01/12/10 01:35:00 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html