I was expecting to hear a carrier, but after I thought about it that
can't be the case.
With the IF connected to the Subreceiver I can tune around either
side of 8215 and hear QSO's. I have to have the Preamp on by I can hear
them. Would that be considered adequate? I have done the IF mod and used a
15K resistor in place of the original. I actually had a 10K & a 15K and Gary
Surrency said either one of them would work. So error on the side of caution
I used the 15K.
Stan Rife
W5EWA
-----Original Message-----
From: Don Wilhelm [mailto:[email protected]]
Sent: Tuesday, January 12, 2010 4:27 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [Elecraft] [K3] IF output
Stan,
I should think you can - although you will have to be careful to listen
to the correct audio channel - it would be wierd to hear the real K3
received signal in one ear and the sub receiving the IF output signal in
the other.
73,
Don W3FPR
[email protected] wrote:
> Don, can I use the SUB receiver in the K3 to do that? I have the KBPF3 in
the sub receiver.
>
>
> Stan Rife
> W5EWA
>
>
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.725 / Virus Database: 270.14.136/2616 - Release Date: 01/12/10
01:35:00
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
